BACKING PLATES MACHINING SERVICE



1939-1948 Rear Backing Plates machined to bolt on Model A in upright position.
$ 125.00/SET


Includes :
  • Inspect for excess wear.
  • Weld hold plugs into original holes.
  • Machine welds flush.
  • Machine new mounting holes.
  • Machine spring purch cut out.
  • Machine outer flange to eliminate axle shim.
  • P/N 4103 spring porch cut out and dust cover supplied.
1939-1948 Front Backing Plates machined to bolt on Model A.
$ 80.00/SET


Includes:
  • Inspect for excess wear.
  • Weld hold plugs into original holes.
  • Machine welds flush.
  • Machine new mounting holes.







Instructions :
  1. Remove all hardware from backing plates.
  2. Send your backing plates free of grease, oil and dirt.
  3. All backing plates are sold on exchange basis.
    NOTE: The exchange backing plates will not be shipped until CLING has recieved your backing plates and they have been inspected. If at inspection something is wrong, you will be notified of the results and the cost of the repair.
  4. During inspection if we find excess wear or feel the backing plates are not safe for modification, we will return them to you at no charge, except for freight.
  5. If you want your own backing plates machined and not exchanged, add $125.00 for set-up charge and allow 2 or 4 weeks delivery after the receipt.and inspection.
  6. If the backing plates are not serviceable, there is a $125 each core charge.
Additional Machining Services for 1939-1948 Ford Backing Plates.
  • Repair or replace emergency brake tubes and the tube ends.
  • Replace brake shoe adjustor cams and springs.


  • To order above products or to find out more, call us at (480) 777-1202.
    We accept VISA/Mastercard or C.O.D(Money Orders or Cashier Checks).